mH2O to Technical atmospheres

Convert mH2O to Technical atmospheres. Enter a value and view the calculation method, examples and conversion table.

Pressure converter

Worked example1 mH2O = 0.1 Technical atmospheres
Converted value

1Metres of water=0.1Technical atmospheres

Enter a finite value between 0 and 1 trillion, with up to 8 decimal places.

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

mH2O to Technical atmospheres formula

The calculator converts the input to the category's reference unit, then divides by the target unit's factor.

Result = input × source factor ÷ target factor

1 × (9,806.65 ÷ 98,066.5) = 0.1

Worked example: 1 Metres of water = 0.1 Technical atmospheres

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

mH2O to Technical atmospheres conversion table

mH2O to Technical atmospheres
Metres of waterTechnical atmospheres
1 Metres of water0.1 Technical atmospheres
2 Metres of water0.2 Technical atmospheres
5 Metres of water0.5 Technical atmospheres
10 Metres of water1 Technical atmospheres
20 Metres of water2 Technical atmospheres
50 Metres of water5 Technical atmospheres
100 Metres of water10 Technical atmospheres
250 Metres of water25 Technical atmospheres
500 Metres of water50 Technical atmospheres
1,000 Metres of water100 Technical atmospheres

Definitions and assumptions

Pressure factors are expressed relative to pascals. A standard atmosphere is exactly 101325 Pa and one bar is exactly 100000 Pa. Liquid-column units use conventional reference values; actual pressure depends on density and gravity.

How to use this calculator

  1. Enter the value you want to convert.
  2. Choose the source and target units, then adjust the display precision if needed.
  3. Read the result. Select Convert to open a page for this value, or use the table below.

Frequently asked questions

how many Technical atmospheres is 1 mH2O?

1 Metres of water = 0.1 Technical atmospheres. Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

how to convert mH2O to Technical atmospheres?

The calculator converts the input to the category's reference unit, then divides by the target unit's factor. 1 × 0.1 ≈ 0.1 Technical atmospheres. Use the source and target factors shown in the formula. The worked example uses the value on this page, and the table provides other common values.

Does this convert gauge pressure to absolute pressure?

The tool changes units only. Converting gauge pressure to absolute pressure also requires the reference atmospheric pressure, which must be added separately in consistent units.

Why is the displayed result rounded?

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

What input range can I use?

This calculator accepts non-negative values up to 1 trillion, with up to 8 decimal places. It does not calculate signed vectors or calendar date intervals.

Why is a unit unavailable?

A conversion is unavailable when a verified unit definition or a current exchange-rate value has not been configured. The tool does not invent a coefficient.

Sources and methodology

Methods and sources · Content revised

Report a problem