mH2O to psi

Convert mH2O to psi. Enter a value and view the calculation method, examples and conversion table.

Pressure converter

Worked example1 mH2O ≈ 1.422334 psi
Converted value

1Metres of water≈1.422334Pounds per square inch

Enter a finite value between 0 and 1 trillion, with up to 8 decimal places.

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

mH2O to psi formula

The calculator converts the input to the category's reference unit, then divides by the target unit's factor.

Result = input × source factor ÷ target factor

1 × (9,806.65 ÷ 6,894.75729317) ≈ 1.422334

Worked example: 1 Metres of water ≈ 1.422334 Pounds per square inch

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

mH2O to psi conversion table

mH2O to psi
Metres of waterPounds per square inch
1 Metres of water≈ 1.422334 Pounds per square inch
2 Metres of water≈ 2.844669 Pounds per square inch
5 Metres of water≈ 7.111672 Pounds per square inch
10 Metres of water≈ 14.223343 Pounds per square inch
20 Metres of water≈ 28.446687 Pounds per square inch
50 Metres of water≈ 71.116717 Pounds per square inch
100 Metres of water≈ 142.233433 Pounds per square inch
250 Metres of water≈ 355.583583 Pounds per square inch
500 Metres of water≈ 711.167165 Pounds per square inch
1,000 Metres of water≈ 1,422.334331 Pounds per square inch

Definitions and assumptions

Pressure factors are expressed relative to pascals. A standard atmosphere is exactly 101325 Pa and one bar is exactly 100000 Pa. Liquid-column units use conventional reference values; actual pressure depends on density and gravity.

How to use this calculator

  1. Enter the value you want to convert.
  2. Choose the source and target units, then adjust the display precision if needed.
  3. Read the result. Select Convert to open a page for this value, or use the table below.

Frequently asked questions

how many psi is 1 mH2O?

1 Metres of water ≈ 1.422334 Pounds per square inch. Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

how to convert mH2O to psi?

The calculator converts the input to the category's reference unit, then divides by the target unit's factor. 1 × 1.42233433071 ≈ 1.422334 Pounds per square inch. Use the source and target factors shown in the formula. The worked example uses the value on this page, and the table provides other common values.

Does this convert gauge pressure to absolute pressure?

The tool changes units only. Converting gauge pressure to absolute pressure also requires the reference atmospheric pressure, which must be added separately in consistent units.

Why is the displayed result rounded?

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

What input range can I use?

This calculator accepts non-negative values up to 1 trillion, with up to 8 decimal places. It does not calculate signed vectors or calendar date intervals.

Why is a unit unavailable?

A conversion is unavailable when a verified unit definition or a current exchange-rate value has not been configured. The tool does not invent a coefficient.

Sources and methodology

Methods and sources · Content revised

Report a problem