Technical atmospheres to mH2O

Convert Technical atmospheres to mH2O. Enter a value and view the calculation method, examples and conversion table.

Pressure converter

Worked example1 Technical atmospheres = 10 mH2O
Converted value

1Technical atmospheres=10Metres of water

Enter a finite value between 0 and 1 trillion, with up to 8 decimal places.

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

Technical atmospheres to mH2O formula

The calculator converts the input to the category's reference unit, then divides by the target unit's factor.

Result = input × source factor ÷ target factor

1 × (98,066.5 ÷ 9,806.65) = 10

Worked example: 1 Technical atmospheres = 10 Metres of water

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

Technical atmospheres to mH2O conversion table

Technical atmospheres to mH2O
Technical atmospheresMetres of water
1 Technical atmospheres10 Metres of water
2 Technical atmospheres20 Metres of water
5 Technical atmospheres50 Metres of water
10 Technical atmospheres100 Metres of water
20 Technical atmospheres200 Metres of water
50 Technical atmospheres500 Metres of water
100 Technical atmospheres1,000 Metres of water
250 Technical atmospheres2,500 Metres of water
500 Technical atmospheres5,000 Metres of water
1,000 Technical atmospheres10,000 Metres of water

Definitions and assumptions

Pressure factors are expressed relative to pascals. A standard atmosphere is exactly 101325 Pa and one bar is exactly 100000 Pa. Liquid-column units use conventional reference values; actual pressure depends on density and gravity.

How to use this calculator

  1. Enter the value you want to convert.
  2. Choose the source and target units, then adjust the display precision if needed.
  3. Read the result. Select Convert to open a page for this value, or use the table below.

Frequently asked questions

how many mH2O is 1 Technical atmospheres?

1 Technical atmospheres = 10 Metres of water. Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

how to convert Technical atmospheres to mH2O?

The calculator converts the input to the category's reference unit, then divides by the target unit's factor. 1 × 10 ≈ 10 Metres of water. Use the source and target factors shown in the formula. The worked example uses the value on this page, and the table provides other common values.

Does this convert gauge pressure to absolute pressure?

The tool changes units only. Converting gauge pressure to absolute pressure also requires the reference atmospheric pressure, which must be added separately in consistent units.

Why is the displayed result rounded?

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

What input range can I use?

This calculator accepts non-negative values up to 1 trillion, with up to 8 decimal places. It does not calculate signed vectors or calendar date intervals.

Why is a unit unavailable?

A conversion is unavailable when a verified unit definition or a current exchange-rate value has not been configured. The tool does not invent a coefficient.

Sources and methodology

Methods and sources · Content revised

Report a problem