torr to psi

Convert torr to psi. Enter a value and view the calculation method, examples and conversion table.

Pressure converter

Worked example1 torr ≈ 0.0193368 psi
Converted value

1Torr≈0.0193368Pounds per square inch

Enter a finite value between 0 and 1 trillion, with up to 8 decimal places.

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

torr to psi formula

The calculator converts the input to the category's reference unit, then divides by the target unit's factor.

Result = input × source factor ÷ target factor

1 × (133.322368421 ÷ 6,894.75729317) ≈ 0.0193368

Worked example: 1 Torr ≈ 0.0193368 Pounds per square inch

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

torr to psi conversion table

torr to psi
TorrPounds per square inch
1 Torr≈ 0.0193368 Pounds per square inch
2 Torr≈ 0.0386735 Pounds per square inch
5 Torr≈ 0.0966839 Pounds per square inch
10 Torr≈ 0.193368 Pounds per square inch
20 Torr≈ 0.386735 Pounds per square inch
50 Torr≈ 0.966839 Pounds per square inch
100 Torr≈ 1.933677 Pounds per square inch
250 Torr≈ 4.834194 Pounds per square inch
500 Torr≈ 9.668387 Pounds per square inch
1,000 Torr≈ 19.336775 Pounds per square inch

Definitions and assumptions

Pressure factors are expressed relative to pascals. A standard atmosphere is exactly 101325 Pa and one bar is exactly 100000 Pa. Liquid-column units use conventional reference values; actual pressure depends on density and gravity.

How to use this calculator

  1. Enter the value you want to convert.
  2. Choose the source and target units, then adjust the display precision if needed.
  3. Read the result. Select Convert to open a page for this value, or use the table below.

Frequently asked questions

how many psi is 1 torr?

1 Torr ≈ 0.0193368 Pounds per square inch. Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

how to convert torr to psi?

The calculator converts the input to the category's reference unit, then divides by the target unit's factor. 1 × 0.0193367747046 ≈ 0.0193368 Pounds per square inch. Use the source and target factors shown in the formula. The worked example uses the value on this page, and the table provides other common values.

Does this convert gauge pressure to absolute pressure?

The tool changes units only. Converting gauge pressure to absolute pressure also requires the reference atmospheric pressure, which must be added separately in consistent units.

Why is the displayed result rounded?

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

What input range can I use?

This calculator accepts non-negative values up to 1 trillion, with up to 8 decimal places. It does not calculate signed vectors or calendar date intervals.

Why is a unit unavailable?

A conversion is unavailable when a verified unit definition or a current exchange-rate value has not been configured. The tool does not invent a coefficient.

Sources and methodology

Methods and sources · Content revised

Report a problem