psi to inHg

Convert psi to inHg. Enter a value and view the calculation method, examples and conversion table.

Pressure converter

Worked example1 psi ≈ 2.036021 inHg
Converted value

1Pounds per square inch≈2.036021Inches of mercury

Enter a finite value between 0 and 1 trillion, with up to 8 decimal places.

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

psi to inHg formula

The calculator converts the input to the category's reference unit, then divides by the target unit's factor.

Result = input × source factor ÷ target factor

1 × (6,894.75729317 ÷ 3,386.38864034) ≈ 2.036021

Worked example: 1 Pounds per square inch ≈ 2.036021 Inches of mercury

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

psi to inHg conversion table

psi to inHg
Pounds per square inchInches of mercury
1 Pounds per square inch≈ 2.036021 Inches of mercury
2 Pounds per square inch≈ 4.072041 Inches of mercury
5 Pounds per square inch≈ 10.180103 Inches of mercury
10 Pounds per square inch≈ 20.360207 Inches of mercury
20 Pounds per square inch≈ 40.720414 Inches of mercury
50 Pounds per square inch≈ 101.801034 Inches of mercury
100 Pounds per square inch≈ 203.602068 Inches of mercury
250 Pounds per square inch≈ 509.005169 Inches of mercury
500 Pounds per square inch≈ 1,018.010339 Inches of mercury
1,000 Pounds per square inch≈ 2,036.020677 Inches of mercury

Definitions and assumptions

Pressure factors are expressed relative to pascals. A standard atmosphere is exactly 101325 Pa and one bar is exactly 100000 Pa. Liquid-column units use conventional reference values; actual pressure depends on density and gravity.

How to use this calculator

  1. Enter the value you want to convert.
  2. Choose the source and target units, then adjust the display precision if needed.
  3. Read the result. Select Convert to open a page for this value, or use the table below.

Frequently asked questions

how many inHg is 1 psi?

1 Pounds per square inch ≈ 2.036021 Inches of mercury. Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

how to convert psi to inHg?

The calculator converts the input to the category's reference unit, then divides by the target unit's factor. 1 × 2.03602067732 ≈ 2.036021 Inches of mercury. Use the source and target factors shown in the formula. The worked example uses the value on this page, and the table provides other common values.

Does this convert gauge pressure to absolute pressure?

The tool changes units only. Converting gauge pressure to absolute pressure also requires the reference atmospheric pressure, which must be added separately in consistent units.

Why is the displayed result rounded?

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

What input range can I use?

This calculator accepts non-negative values up to 1 trillion, with up to 8 decimal places. It does not calculate signed vectors or calendar date intervals.

Why is a unit unavailable?

A conversion is unavailable when a verified unit definition or a current exchange-rate value has not been configured. The tool does not invent a coefficient.

Sources and methodology

Methods and sources · Content revised

Report a problem