nm to μm

Convert nm to μm. Enter a value and view the calculation method, examples and conversion table.

Length converter

Worked example1 nm = 0.001 μm
Converted value

1Nanometres=0.001Micrometres

Enter a finite value between 0 and 1 trillion, with up to 8 decimal places.

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

nm to μm formula

The calculator converts the input to the category's reference unit, then divides by the target unit's factor.

Result = input × source factor ÷ target factor

1 × (0.000000001 ÷ 0.000001) = 0.001

Worked example: 1 Nanometres = 0.001 Micrometres

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

nm to μm conversion table

nm to μm
NanometresMicrometres
1 Nanometres0.001 Micrometres
2 Nanometres0.002 Micrometres
5 Nanometres0.005 Micrometres
10 Nanometres0.01 Micrometres
20 Nanometres0.02 Micrometres
50 Nanometres0.05 Micrometres
100 Nanometres0.1 Micrometres
250 Nanometres0.25 Micrometres
500 Nanometres0.5 Micrometres
1,000 Nanometres1 Micrometres

Definitions and assumptions

Length factors are expressed relative to metres. The international foot is exactly 0.3048 m and the inch is exactly 0.0254 m. These definitions do not represent the former US survey foot.

How to use this calculator

  1. Enter the value you want to convert.
  2. Choose the source and target units, then adjust the display precision if needed.
  3. Read the result. Select Convert to open a page for this value, or use the table below.

Frequently asked questions

how many μm is 1 nm?

1 Nanometres = 0.001 Micrometres. Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

how to convert nm to μm?

The calculator converts the input to the category's reference unit, then divides by the target unit's factor. 1 × 0.001 ≈ 0.001 Micrometres. Use the source and target factors shown in the formula. The worked example uses the value on this page, and the table provides other common values.

Can the result be shown as feet and inches?

This calculator shows decimal feet or decimal inches. For a mixed format, take the whole feet and multiply the remaining fraction by 12 to obtain inches.

Why is the displayed result rounded?

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

What input range can I use?

This calculator accepts non-negative values up to 1 trillion, with up to 8 decimal places. It does not calculate signed vectors or calendar date intervals.

Why is a unit unavailable?

A conversion is unavailable when a verified unit definition or a current exchange-rate value has not been configured. The tool does not invent a coefficient.

Sources and methodology

Methods and sources · Content revised

Report a problem