milligal to m/s²

Convert milligal to m/s². Enter a value and view the calculation method, examples and conversion table.

Acceleration converter

Worked example1 milligal = 0.00001 m/s²
Converted value

1Milligals=0.00001Metres per second squared

Enter a finite value between 0 and 1 trillion, with up to 8 decimal places.

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

milligal to m/s² formula

The calculator converts the input to the category's reference unit, then divides by the target unit's factor.

Result = input × source factor ÷ target factor

1 × (0.00001 ÷ 1) = 0.00001

Worked example: 1 Milligals = 0.00001 Metres per second squared

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

milligal to m/s² conversion table

milligal to m/s²
MilligalsMetres per second squared
1 Milligals0.00001 Metres per second squared
2 Milligals0.00002 Metres per second squared
5 Milligals0.00005 Metres per second squared
10 Milligals0.0001 Metres per second squared
20 Milligals0.0002 Metres per second squared
50 Milligals0.0005 Metres per second squared
100 Milligals0.001 Metres per second squared
250 Milligals0.0025 Metres per second squared
500 Milligals0.005 Metres per second squared
1,000 Milligals0.01 Metres per second squared

Definitions and assumptions

Acceleration describes a change in velocity per unit time. Factors are expressed relative to metres per second squared. Standard gravity is 9.80665 m/s²; local gravity can differ.

How to use this calculator

  1. Enter the value you want to convert.
  2. Choose the source and target units, then adjust the display precision if needed.
  3. Read the result. Select Convert to open a page for this value, or use the table below.

Frequently asked questions

how many m/s² is 1 milligal?

1 Milligals = 0.00001 Metres per second squared. Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

how to convert milligal to m/s²?

The calculator converts the input to the category's reference unit, then divides by the target unit's factor. 1 × 0.00001 ≈ 0.00001 Metres per second squared. Use the source and target factors shown in the formula. The worked example uses the value on this page, and the table provides other common values.

Is standard gravity the same everywhere?

No. The conventional value 9.80665 m/s² defines the standard-gravity conversion. Actual local acceleration due to gravity depends on location and altitude.

Why is the displayed result rounded?

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

What input range can I use?

This calculator accepts non-negative values up to 1 trillion, with up to 8 decimal places. It does not calculate signed vectors or calendar date intervals.

Why is a unit unavailable?

A conversion is unavailable when a verified unit definition or a current exchange-rate value has not been configured. The tool does not invent a coefficient.

Sources and methodology

Methods and sources · Content revised

Report a problem