kgf/cm² to psi
Convert kgf/cm² to psi. Enter a value and view the calculation method, examples and conversion table.
Pressure converter
kgf/cm² to psi formula
The calculator converts the input to the category's reference unit, then divides by the target unit's factor.
Result = input × source factor ÷ target factor
1 × (98,066.5 ÷ 6,894.75729317) ≈ 14.223343
Worked example: 1 kgf/cm² ≈ 14.223343 Pounds per square inch
Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.
kgf/cm² to psi conversion table
| kgf/cm² | Pounds per square inch |
|---|---|
| 1 kgf/cm² | ≈ 14.223343 Pounds per square inch |
| 2 kgf/cm² | ≈ 28.446687 Pounds per square inch |
| 5 kgf/cm² | ≈ 71.116717 Pounds per square inch |
| 10 kgf/cm² | ≈ 142.233433 Pounds per square inch |
| 20 kgf/cm² | ≈ 284.466866 Pounds per square inch |
| 50 kgf/cm² | ≈ 711.167165 Pounds per square inch |
| 100 kgf/cm² | ≈ 1,422.334331 Pounds per square inch |
| 250 kgf/cm² | ≈ 3,555.835827 Pounds per square inch |
| 500 kgf/cm² | ≈ 7,111.671654 Pounds per square inch |
| 1,000 kgf/cm² | ≈ 14,223.343307 Pounds per square inch |
Definitions and assumptions
Pressure factors are expressed relative to pascals. A standard atmosphere is exactly 101325 Pa and one bar is exactly 100000 Pa. Liquid-column units use conventional reference values; actual pressure depends on density and gravity.
How to use this calculator
- Enter the value you want to convert.
- Choose the source and target units, then adjust the display precision if needed.
- Read the result. Select Convert to open a page for this value, or use the table below.
Frequently asked questions
how many psi is 1 kgf/cm²?
1 kgf/cm² ≈ 14.223343 Pounds per square inch. Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.
how to convert kgf/cm² to psi?
The calculator converts the input to the category's reference unit, then divides by the target unit's factor. 1 × 14.2233433071 ≈ 14.223343 Pounds per square inch. Use the source and target factors shown in the formula. The worked example uses the value on this page, and the table provides other common values.
Does this convert gauge pressure to absolute pressure?
The tool changes units only. Converting gauge pressure to absolute pressure also requires the reference atmospheric pressure, which must be added separately in consistent units.
Why is the displayed result rounded?
Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.
What input range can I use?
This calculator accepts non-negative values up to 1 trillion, with up to 8 decimal places. It does not calculate signed vectors or calendar date intervals.
Why is a unit unavailable?
A conversion is unavailable when a verified unit definition or a current exchange-rate value has not been configured. The tool does not invent a coefficient.
Sources and methodology
Methods and sources · Content revised
Report a problem