Grads to Cycles
Convert Grads to Cycles. Enter a value and view the calculation method, examples and conversion table.
Angle converter
Grads to Cycles formula
The calculator converts the input to the category's reference unit, then divides by the target unit's factor.
Result = input × source factor ÷ target factor
1 × (0.0157079632679 ÷ 6.28318530718) ≈ 0.0025
Worked example: 1 Grads = 0.0025 Cycles
Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.
Grads to Cycles conversion table
| Grads | Cycles |
|---|---|
| 1 Grads | 0.0025 Cycles |
| 2 Grads | 0.005 Cycles |
| 5 Grads | 0.0125 Cycles |
| 10 Grads | 0.025 Cycles |
| 20 Grads | 0.05 Cycles |
| 50 Grads | 0.125 Cycles |
| 100 Grads | 0.25 Cycles |
| 250 Grads | 0.625 Cycles |
| 500 Grads | 1.25 Cycles |
| 1,000 Grads | 2.5 Cycles |
Definitions and assumptions
Angles are converted through radians. One full turn is 2π radians or 360 degrees. NATO, Swedish and former Soviet angular mils use different divisions and are separate units.
How to use this calculator
- Enter the value you want to convert.
- Choose the source and target units, then adjust the display precision if needed.
- Read the result. Select Convert to open a page for this value, or use the table below.
Frequently asked questions
how many Cycles is 1 Grads?
1 Grads = 0.0025 Cycles. Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.
how to convert Grads to Cycles?
The calculator converts the input to the category's reference unit, then divides by the target unit's factor. 1 × 0.0025 ≈ 0.0025 Cycles. Use the source and target factors shown in the formula. The worked example uses the value on this page, and the table provides other common values.
Why are there different angular mils?
Different conventions divide a turn into different counts, such as 6400, 6300 or 6000. Select the named convention instead of treating every mil as identical.
Why is the displayed result rounded?
Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.
What input range can I use?
This calculator accepts non-negative values up to 1 trillion, with up to 8 decimal places. It does not calculate signed vectors or calendar date intervals.
Why is a unit unavailable?
A conversion is unavailable when a verified unit definition or a current exchange-rate value has not been configured. The tool does not invent a coefficient.
Sources and methodology
Methods and sources · Content revised
Report a problem