gal to m/s²

Convert gal to m/s². Enter a value and view the calculation method, examples and conversion table.

Acceleration converter

Worked example1 gal = 0.01 m/s²
Converted value

1Gals=0.01Metres per second squared

Enter a finite value between 0 and 1 trillion, with up to 8 decimal places.

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

gal to m/s² formula

The calculator converts the input to the category's reference unit, then divides by the target unit's factor.

Result = input × source factor ÷ target factor

1 × (0.01 ÷ 1) = 0.01

Worked example: 1 Gals = 0.01 Metres per second squared

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

gal to m/s² conversion table

gal to m/s²
GalsMetres per second squared
1 Gals0.01 Metres per second squared
2 Gals0.02 Metres per second squared
5 Gals0.05 Metres per second squared
10 Gals0.1 Metres per second squared
20 Gals0.2 Metres per second squared
50 Gals0.5 Metres per second squared
100 Gals1 Metres per second squared
250 Gals2.5 Metres per second squared
500 Gals5 Metres per second squared
1,000 Gals10 Metres per second squared

Definitions and assumptions

Acceleration describes a change in velocity per unit time. Factors are expressed relative to metres per second squared. Standard gravity is 9.80665 m/s²; local gravity can differ.

How to use this calculator

  1. Enter the value you want to convert.
  2. Choose the source and target units, then adjust the display precision if needed.
  3. Read the result. Select Convert to open a page for this value, or use the table below.

Frequently asked questions

how many m/s² is 1 gal?

1 Gals = 0.01 Metres per second squared. Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

how to convert gal to m/s²?

The calculator converts the input to the category's reference unit, then divides by the target unit's factor. 1 × 0.01 ≈ 0.01 Metres per second squared. Use the source and target factors shown in the formula. The worked example uses the value on this page, and the table provides other common values.

Is standard gravity the same everywhere?

No. The conventional value 9.80665 m/s² defines the standard-gravity conversion. Actual local acceleration due to gravity depends on location and altitude.

Why is the displayed result rounded?

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

What input range can I use?

This calculator accepts non-negative values up to 1 trillion, with up to 8 decimal places. It does not calculate signed vectors or calendar date intervals.

Why is a unit unavailable?

A conversion is unavailable when a verified unit definition or a current exchange-rate value has not been configured. The tool does not invent a coefficient.

Sources and methodology

Methods and sources · Content revised

Report a problem