ft/s² to gal

Convert ft/s² to gal. Enter a value and view the calculation method, examples and conversion table.

Acceleration converter

Worked example1 ft/s² = 30.48 gal
Converted value

1Feet per second squared=30.48Gals

Enter a finite value between 0 and 1 trillion, with up to 8 decimal places.

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

ft/s² to gal formula

The calculator converts the input to the category's reference unit, then divides by the target unit's factor.

Result = input × source factor ÷ target factor

1 × (0.3048 ÷ 0.01) = 30.48

Worked example: 1 Feet per second squared = 30.48 Gals

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

ft/s² to gal conversion table

ft/s² to gal
Feet per second squaredGals
1 Feet per second squared30.48 Gals
2 Feet per second squared60.96 Gals
5 Feet per second squared152.4 Gals
10 Feet per second squared304.8 Gals
20 Feet per second squared609.6 Gals
50 Feet per second squared1,524 Gals
100 Feet per second squared3,048 Gals
250 Feet per second squared7,620 Gals
500 Feet per second squared15,240 Gals
1,000 Feet per second squared30,480 Gals

Definitions and assumptions

Acceleration describes a change in velocity per unit time. Factors are expressed relative to metres per second squared. Standard gravity is 9.80665 m/s²; local gravity can differ.

How to use this calculator

  1. Enter the value you want to convert.
  2. Choose the source and target units, then adjust the display precision if needed.
  3. Read the result. Select Convert to open a page for this value, or use the table below.

Frequently asked questions

how many gal is 1 ft/s²?

1 Feet per second squared = 30.48 Gals. Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

how to convert ft/s² to gal?

The calculator converts the input to the category's reference unit, then divides by the target unit's factor. 1 × 30.48 ≈ 30.48 Gals. Use the source and target factors shown in the formula. The worked example uses the value on this page, and the table provides other common values.

Is standard gravity the same everywhere?

No. The conventional value 9.80665 m/s² defines the standard-gravity conversion. Actual local acceleration due to gravity depends on location and altitude.

Why is the displayed result rounded?

Auto mode preserves significant digits for small values; manual mode rounds to the selected decimal places. ≈ means approximate; < means below the display limit. Extreme values use × 10ⁿ. Calculations are rounded only for display.

What input range can I use?

This calculator accepts non-negative values up to 1 trillion, with up to 8 decimal places. It does not calculate signed vectors or calendar date intervals.

Why is a unit unavailable?

A conversion is unavailable when a verified unit definition or a current exchange-rate value has not been configured. The tool does not invent a coefficient.

Sources and methodology

Methods and sources · Content revised

Report a problem